• Universal Printer:The new Universal Printer driver was detected by some Anti-virus (like AVG) as a risk. Of cause it was a False/Positive annoyance.It has been re-written to eliminate this problem.
    The new Universal Printer driver is now automatically set with the server printer page format (A4 or Letter). The user can change this format when printing usingUniversal Printer --> Properties --> Advanced This user preference choice is saved for the next sessions.The new Universal Printer driver is handling correctly narrow margins, and even no margin at all.When a print is started, the print job waits until the PDF file is fully created prior to copy it to the client side. This is an important fix. Before, on loaded servers, or for large prints, the copy was processed too early.
  • AdminTool: If the new Universal Printer is not install, the AdminTool is asking the administrator to install it.We also added in the Session Preference tile one button to re-install the Universal Printer Driver.This can be useful for support.
    Two new patches:We removed from the old SetupUniversalPrinter.exe patch.
    We replaced it by the 2 following programs: This program is processing the uninstall the new and the old Universal Printer driver prior to install the old Universal Printer driver (V1). Doing it, it warrants the result: the old driver will be correctly installed. This program is processing the uninstall the new and the old Universal Printer driver prior to install the latest Universal Printer driver (V2). Doing it, it warrants the result: the new driver will be correctly installed.
  • Start Button:Start button display and/or Taskbar display when one single application was published. We did fix this issue. Now, when a single application or the Floating Panel is published, the user does not see anymore the Windows Start button.
  • Client Generator:As you know we are using the clipboad to communicate between the client side and the server side.On very low commication line, we was clearing the clipbaord too fast.It is fixed now.
  • When several connection client was running on the same PC, it was useless to have 2 copies of the same programrunning after the PDF prints. It is fixed now.
  • The code was waiting the user to close his Acrobat prior to open the next print.As result, the user can "feel" that the print is not arrived.Wrong feeling. However, it is fixed now.
  • Now each prints will be open as soon as ready on the user local disk.If for any raison, the generated client cannot behave as expected, the connection clientdetects that one PDF has not been printed and it propose the user to try to open it in Preview.On the server side: In order to be able to copy the PDF files, we need to know where is the destination folder on the user side.To do so we are using the clipboard. However the information is also availbale in the file name "clientenvironment.ini" which uploaded when the session is opening. To avoid cases where the content of the clipboard was corruptedby a slow communication, we double check the information with clientenvironment.ini content.
  • We also added some more delay for the print jobs to be completed.
  • Enhanced Start menu:The TSplus START menu now includes 5 entries
    Client Generator
    Uninstall TSplus
    User Guide
    Universal Printer: Setup
    Universal Printer: Remove
  • Universal Printer:The Universal Printer is no more installed during the Setup, or during the Update.If the Universal Printer driver is not installed, when the administrator starts the AdminTool, he will see a message box proposing him to install it.As result, the Setup is faster. The Universal Printer can also be installed by the administrator using the new START menu entry.Also, the AdminTool license tab is now displaying if the Universal Printer is installed and if it is a release 10, or a old release 9 driver. Please keep in mind that the new Universal Printer driver cannot be installed on old 2003/XP system.For these old systems, it is requested to use
  • Logon process:The logon process has been deeply audited to provide the best performances and the most predictable behavior regardless the client kind (mstsc, RemoteApp, HTML5, Seamless client) or the kind of started application (Full Desktop, one single application, TSplus Taskbar, Floating Panel or Web Application Portal).
  • Logon name with special character:The support of logon names with special characters like "ü" has been added
  • Client Generator:The generated client has been changed to be compatible with older releases and to be able to print with old and new Universal Printer installed on the server side. The generated client had files not properly installed and it is fixed now.
  • Print Preview: The print preview has been changed: If the user has a PDF viewer like Acrobat, the preview will use it. If the user does not have any PDF view, TSplus client will automatically use Sumatra as fallback.
  • We changes the release number to 10.30 for customer support purposes. For any customer is using the release 10.10, or 10.20 and is having an issue, the solution will be to advise him to apply the Update Release patch and to reboot.
  • One last comment: This 10.30 release is the first one for which we have use our new Automatic Validation toolkit.We are pleased to confirm that the 10.30 release has successfully pass 25 validation test cases.
  • Fixes double connection with RemoteAppClient
  • Improves uninstall process
  • Logonsession has been change to fix two possible issues: RemoteApp when the TSplus Taskbar was published Some possible cases where nothing was started
  • A new release of HTML5 code has been included
  • Logonsession has been change to fix two possible issues: RemoteApp when the TSplus Taskbar was published Some possible cases where nothing was started
  • A new release of HTML5 code has been included
  • Fix of uninstall after reboot: After uninstall AND reboot, the folders was not completly removed It is fixed now
  • Client Generator: The generated client was not handling correctly the Universal Printer when Acrobat of Foxit was not installed on the user PC.It is fixed now.
  • Client Generator: The RemoteApp mode was not correctly handle It is fixed now.
  • Old connection client connecting to the release 10.20 was not acting as expected for the Universal Printer and the RemoteApp mode. It is fixed now.
  • The form for typing the logon/password was displaying a wrong icon.It is fixed now
  • When a user logon, a password or a domain name was using the "-" character, the result was wrong causing an issue.It is fixed now
  • Web RemoteApp plug-in: Because of the fixes listed for the Client Generator has been implemented, it also fixes now the Web RemoteApp plug-in.
  • Universal Printer: For any new installation (not Update Release), we are now using a new release of the Universal Printer. This new release fix the issues when the paper format was with narrow margins of with no margin at all. It also better handle the print fonts. Last but not least, we have now the option to add some printer setting features for the Administrator
  • This is not yet implemented in the AdminTool but it will be done soon.Windows is displaying a Security warning pop-up when this new Universal Printer driver is installed. We added a message for the administrator be advise him to accept this new driver. We also added a message if the new Universal Printer driver is not properly installed. This message is display at reboot and when running the System Audit feature. The START Menu includes now 2 new entries to be able to install or to uninstall the new Universal Printer driver. This will help for the support task of our customers.About the Universal Printer driver, please keep in mind the 3 following facts.
    1) In case of Update Release, we do not install the new driver, BUT, the new UP setup program is available and can be used for users which would have issues with their old UP driver.
    2) In case of new Setup, it is always the new UP driver which is installed
  • Reboot trial message: The reboot trial message was no display correctly.It is fixed now
  • SVRC.exe: We have reset SVCR.exe to its original version from AutoIT to avoid cases where it was crashing on some customer systems. We do not know yet why this is happening and we will see if this simple action is enough, or not, to eliminate this kind of issue.
  • Bug with SVRC.exe apparently not fixed properly yesterday This new compile is just done to fix it. On our tests, this morning, the problem of SVCR.exe is fixed
  • SVCR.exe was not properly install in the upload made yesterday night and tis morning. It is fixed now
  • Client Generator: For many years, if a new generated client is using the name of a old one, we did not changed the settings stored on the user PC /RDP folder. We added one option to enforce the new setting, even if the connection client name is identical.
  • Client Generator: We decided to keep Sumatra as "local PDF toolkit". Some user PCs does not have Acrobat or Foxit, so it keep our connection client able to print on any PC.
  • Logon process: We did test and fix issues related to logon/logoff/disconnect/reconnect/capture sessions. The case of single application started has also be studied in detail to prevent cases where a logoff is happening just after the logon. The behavior of the RemoteApp client has been review to avoid the logon Session process to start twice, or to logoff immediately after the logon.
  • Single application: We have strength the logon program to warrant a fallback solution if the single application that starts failed to do so. Instead of logoff, we start the Taskbar (RemoteApp) or a full desktop (RDP mode). Please note that if you close too fast the application (within 10 seconds) the system will think that the application failed to start and will go to the fallback new feature. In the AppControl.ini file you can request a logoff to disable this option, or request to start your own default application to be used as fallback.
  • SessionID: We have standardize the method to read the user SessionID. Doing so, we avoid some issues related to printing after a disconnect/reconnect.
  • Wait without using CPU: We have generalize the use of Windows API to shrink the CPU usage of our programs. This also eliminate some issue where the session was never closed.- SVCR crashes: We modified the code to prevent SVCR crashes. We are not sure yet that these enhancements will be enough to fix this kind of issue that we hardly can reproduce on our test labs.
  • Universal Printer: The Update Release does not install the new Universal Printer driver to avoid regression for existing customers. The new Universal Printer driver is installed for anyone running the Setup program. Please note that in the coming week or so, we will use a new version for the new Universal Printer driver which will enable us to change the paper format (A4 or Letter) and to scale the document to fit into the format even when the margins are narrow ones.
  • System Audit: The System Audit is delivering a positive answer if the new, or the old, Uiversal Printer driver is installed.
  • HTML5: We added the option to add in the URL a command line which enable to change any of the settings.js values. The option to use Shift Function keys has been added too.
  • logonsession program When starting one single application, or the Web Application Panel, and RemoteApp Their was issues (black screen, logoff...). It is fixed now
  • RemoteApp client was not starting properly. This was an issue that last for several months. As result, some time, the reconnect was wrong too. This is fxed now
  • With single application started by the Web Application Portal, the session did close immediately. If is fixed now.
  • Load-Balancing Manager now displays "(DISABLED)" in the Application Servers list for disabled servers.
  • Setup-FlexiCloud.exe now supports customizable proxy settings.
  • The HTML5 code is handling now the time zone redirection, including the Summer/Winter time.
  • The AdminTool has been reviewed to avoid errors on undeclared variables.
  • The System Audit telling that some component of the 10.10 release was not at the same level has been fixed.
  • The Security option "Limit access to Remote Desktop group" was not working. It is fixed now.
  • The Farm Manager was not displaying the real RDP port of the Application Servers, it is fixed.

First of all, all known 9.90 issues have been fixed, such as:

  • Administrators can monitor their Server Farms from the TSplus Gateway : the new 10.10 release ensures the 100% efficiency of the powerful Farm manager feature included in TSplus Enterprise Edition.
  • Users of the RemoteApp now benefit from automatic updates.
  • When using the TSplus 10.10 Remote App client, the logon prevents the use of an "empty password". The goal is to enhance the security. The user's credential becomes mandatory and this avoids to access Windows server side logon page.
  • The System Audit has changed to include the new TSplus 10.10 great Universal Printer new features.Then, TSplus 10.10 Release brings great enhancements:
  • The TSplus HMTL5 client improves the user experience; it includes a nice top menu, which is now docking back on top when the user is selecting one of its tool. It also brings a new option for customization of the keyboard input box when clicking on entry field from Tablets or Smartphone. Besides, the code for Web uploads has been re-written to allow multiple selections and files transfer from the server to the user's workstation.
  • The Universal Printer has been completely rewritten to provide a faster and reliable local printing solution. With TSplus 10.10, the local printers mapping function is set as default when using the RemoteApp client.
  • TSplus 10.10 processes have been optimized to eliminate the CPU requirement. This is important for servers where many sessions are started. With this major improvement, TSplus becomes the best solution to handle a large number of concurrent users on a Windows system.

Comment: The upcoming Microsoft Creator Automatic Update for Windows 10 Basic (Home Edition) is not compatible with TSplus. For customer willing to use TSplus on W10, it will be required to upgrade their W10 Basic system to W10 PRO.

  • This is the release 9.90
  • logonsession.exe has been changes to fix the case of RemoteApp with single application that was crashing in some situations.
  • added a button to remove the background logo
  • adding a background logo does not reset the AdminTool language anymore
  • fixed application launching: when publishing an application with parameters and/or from a non-system disk, an error message "file not found" could be displayed in version 9.90.
  • updated more languages (PL/HU/UK)
  • HTML5: Enhancement of the clipboard handling
  • HTML5: Support of very long file names in file transfer
  • Background custimization: in Session opening preference tile the administrator can now change the color background AND add a logo or a background image This a nice new feature specially when using HTML5 with the Floating Panel.
  • Relase 9.80 (minor release)
  • On some update from old version, programs was not properly replaced because they was already running. Now the service will reset the correct new programs.
  • The system Audit has been changed to avoid a wrong warning- More files are now saved/restored when using this AdminTool feature- Fix has been made in common.js to avoid issue on the latest Android Chrome release.
  • logonsession has been change to avoid to use CPU when only one application is published and my sessions are connected
  • HTML5 has been updated

Iscriviti alla ns. newsletter!

Rainbow Solutions srl
Via Angerweg 1 | 39025 Plaus | Italy
Tel: +39 0473 672314
Skype: rainbow_solutions
IVA: IT02387780212 | cod. fiscale: IT02387780212
© 2021 Rainbow Solutions SRL. All Rights Reserved.

Please publish modules in offcanvas position.